Folding Security Gate 7x7 ft – 14-Gauge Steel Accordion Scissor Gate, 360° Casters, Padlock Included | Storefront & Warehouse

Rolls Open in Seconds. Locks Solid. Collapses Out of the Way When You Don't Need It.

A permanent security door blocks your opening even when you don't need security. A flimsy accordion gate bends the first time someone pushes on it. This 7×7 ft folding steel security gate solves both problems: it expands to an 85-inch working width across your opening, locks with a padlock, and collapses to just 4 inches wide when you want it out of the way — all on 360° rolling casters that move effortlessly across concrete, tile, or warehouse flooring.

14-Gauge Steel — The Spec That Actually Matters for Security

Not all security gates are created equal, and the difference comes down to steel gauge. This gate is built from 3/4" 14-gauge channel steel — the commercial-grade thickness used in serious access control applications. Lower-gauge (thinner) gates flex and can be forced. 14-gauge steel holds its shape under lateral pressure and resists deformation from impact. The black powder-coat finish adds corrosion protection on top of the structural advantage — this gate will hold up in humidity, near loading docks, and in outdoor-adjacent applications without rusting out.

Exact Dimensions — Fits Standard Commercial Openings

Before buying any accordion gate, you need to confirm it covers your opening. Here are the precise specs:

• ✅ Expanded (deployed): 87" H × 85" W
• ✅ Collapsed (stored): 87" H × 4" W

The 85-inch expanded width covers most standard commercial door and storefront openings. At 87 inches tall, it clears standard door heights without leaving a gap at the top. At 4 inches collapsed, it parks nearly flush against a wall or in a corner without blocking foot traffic or creating a hazard.

360° Locking Casters — Deploy and Lock in One Motion

The heavy-duty casters swivel a full 360 degrees for smooth, effortless movement in any direction — even on rough or uneven concrete. When the gate reaches the closed position, the integrated caster locks engage to hold it firmly in place. No creep, no drift, no having to wedge it against something to keep it closed. When you want to move it, release the lock and roll. The entire open-to-locked sequence takes seconds.

Padlock Hasp + Padlock Included — Ready to Lock Immediately

The gate includes both a padlock hasp and a matching padlock with keys. No hunting for a compatible lock before your opening is secured. Mount the gate, run the padlock through the hasp, done. The non-interference scissor design means the lock point is positioned where it creates maximum resistance to forced entry — not just symbolic security.

Complete Hardware Kit — No Additional Purchases Needed

A full mounting hardware kit is included. Everything required for installation comes in the box — no separate trips to the hardware store, no sourcing fasteners for a non-standard application. Installation is straightforward for both new openings and existing door frames.

Specs at a Glance

• ✅ Expanded dimensions: 87" H × 85" W
• ✅ Collapsed dimensions: 87" H × 4" W
• ✅ Steel: 3/4" 14-gauge channel steel
• ✅ Finish: Black powder coat — corrosion and wear resistant
• ✅ Casters: 360° rolling with integrated locking mechanism
• ✅ Security: Padlock hasp + matching padlock + keys included
• ✅ Design: Single accordion scissor (one-sided pull)
• ✅ Includes: Gate, casters, padlock, keys, mounting hardware kit

Where This Gets Installed

• 🏪 Retail storefronts — after-hours security without blocking visibility or requiring a solid door
• 🏭 Warehouses & loading docks — controlled access between zones, shift-end closure of high-value areas
• 🏠 Garage & residential — workshop access control, secure storage room entry
• 🏗️ Construction sites — temporary access control on active job sites
• 🏥 Commercial & industrial facilities — hallways, stairwells, service corridors
• 🛡️ Home defense & hardening — interior door reinforcement, basement or safe room access control

Pro tip: For home defense applications, a folding scissor gate on an interior door or hallway creates a hardened delay point that buys critical time — far more resistant to forced entry than a standard interior door. The 14-gauge steel and padlock hasp make this significantly more effective than chain-and-padlock solutions on standard door hardware.

Free shipping on all orders. Easy returns. Ships fast.

Frequently Asked Questions

What size opening does the 7×7 ft folding security gate fit?

Expanded, the gate measures 87" H × 85" W, which covers most standard commercial door and storefront openings. Measure your opening width and height before ordering to confirm fit, since this is a single accordion (one-sided pull) design rather than a bi-parting gate.

Does the gate come with a lock, or do I need to buy one separately?

It ships ready to lock: a padlock hasp, a matching padlock, and keys are all included. The 360° casters also have an integrated locking mechanism that engages when the gate is closed, so it won't drift or creep even before you add the padlock.

Is this gate strong enough for home security, or is it just for warehouses?

The 3/4" 14-gauge channel steel construction is commercial-grade, so it works for both. It's commonly installed across storefronts and warehouse zones, but the same steel gauge and padlock hasp make it effective as an interior hardening point for garages, basements, or safe rooms at home.