








Scuba Diving Flashlight 2-Pack – T6 LED, 80 ft Waterproof, 6 O-Rings, 3 Modes & USB Rechargeable
Two Dive Lights. 80 Feet Rated. 60,000-Hour LEDs. One Set.
Underwater visibility drops fast with depth — natural light fades to near zero below 30 feet and color perception is dramatically reduced even at snorkeling depths. A dive light isn't just for night diving; it's what restores accurate color to coral, marine life, and underwater terrain during any dive. These rechargeable scuba dive flashlights use T6 LED technology, are rated waterproof to 80 feet (25 meters), and are sealed with 6 O-rings — not a single o-ring at the endcap like most budget dive lights. You get two lights, two chargers, two wrist straps, and backup AAA battery adapters in one kit.
T6 LED — 60,000-Hour Lifespan, No Bulb Replacements
The Cree T6 LED is a proven high-output emitter used across professional-grade flashlights and dive lights. At 60,000 hours of rated lifespan, these LEDs will outlast the flashlight housing by a wide margin — you're not replacing bulbs, and you're not dealing with the gradual output degradation that affects lower-grade LEDs over time. The T6 emitter produces intense white light that penetrates water turbidity more effectively than warm or tinted alternatives.
⚠️ Note: Lumen output is not specified in the product listing. Confirm the exact lumen rating with the supplier and add it to the description — it's the primary comparison spec dive light buyers use.
80 ft / 25m Waterproof Rating — 6 O-Ring Seal System
The 80-foot (25-meter) waterproof rating covers recreational scuba diving to standard depth limits (the PADI Open Water certification limit is 60 feet). The sealing uses 6 O-rings distributed across the flashlight — not just the single endcap O-ring that most consumer flashlights rely on for their "IPX7" ratings. Multiple O-ring distribution means that if one seal develops wear or a debris nick, the others maintain the waterproof barrier. The housing uses an aviation-grade aluminum head with a durable ABS body — aluminum handles the pressure gradient and heat from the LED, while ABS absorbs impact from accidental drops on boat decks and dock edges.
3 Modes — Twist-Tail Operation
Mode switching uses the tail cap twist mechanism — grippy, reliable, operable with dive gloves:
- 💡 High — maximum output for low-visibility conditions, wreck diving, night diving, and deep reef exploration
- 🔅 Low — reduced output for shallow snorkeling, surface navigation, and battery conservation on extended dives
- 🔦 Strobe — emergency signaling both underwater and at surface. Strobing is the internationally recognized diver distress signal visible from significant distance at night
Rechargeable + AAA Backup — Never Stuck Without Power
Primary power is rechargeable via the included USB smart battery chargers. The kit also includes AAA battery adapter tubes — if the rechargeable cells run low between dives on a liveaboard or multi-day trip where USB charging access is limited, you can run the lights on standard AAA batteries available at any convenience store worldwide. The backup adapter system is a meaningful practical feature for travel diving that most rechargeable-only dive lights don't provide.
What's Included — Full Kit for Both Lights
- ✅ 2x Rechargeable dive flashlights
- ✅ 2x USB smart battery chargers
- ✅ 2x Battery sleeve tubes (rechargeable)
- ✅ 2x AAA battery adapters (batteries not included)
- ✅ 2x Adjustable Velcro wrist straps
- ✅ 2x Lanyards
- ✅ 1x User manual
Specs at a Glance
- ✅ Quantity: 2 lights
- ✅ LED: T6 — 60,000-hour rated lifespan
- ✅ Waterproofing: 80 ft / 25m depth rating
- ✅ Seals: 6 O-rings
- ✅ Head material: Aviation-grade aluminum
- ✅ Body: Durable ABS
- ✅ Modes: 3 — High / Low / Strobe
- ✅ Mode switch: Tail cap twist — glove-operable
- ✅ Power: Rechargeable + AAA backup adapter
- ✅ Charging: USB smart charger (included)
- ⚠️ Lumen output: Confirm with supplier and add
Who Uses These Lights
- 🤿 Scuba divers — primary dive light + backup in one kit, both rated to recreational depth limits
- 🏊 Snorkelers — low mode for reef color restoration and crevice illumination in shallow water
- 🎣 Spearfishers — high-output illumination for identifying and targeting fish in low-visibility conditions
- 🚣 Kayakers & water sports athletes — waterproof emergency strobe for surface signaling
- 🔦 Emergency preparedness — waterproof, rechargeable with AAA backup — functions in flood or submersion scenarios
Pro tip: The strobe mode on a dive light is the standard signal for a diver in distress — three short flashes is the universal distress signal at night. Keep one light clipped to your BCD and one accessible in a pocket or mesh bag. During a drift dive or boat pickup, the strobe makes you significantly more visible to the surface crew than a steady light, especially in chop.
Free shipping on all orders. Easy returns. Ships fast.
Choose options










